4 port PoE switch

Description

The Enable-IT 8805 Gigabit PoE switch is a unique product that will automatically detect any LAN device, determine if it is a PoE device and supply power with IEEE 802.3af standard voltage and wattage.

The switch has 4 dedicated 10/100/1000Mbps auto-negotiation RJ-45 LAN ports with each port PoE auto detect enabled. Auto detect PoE uses IEEE 802.3 PoE Power Detection (PD). There is no need to worry about the damage of PoE being applied to non-PoE devices. Connected PoE devices are supplied with up to 30W per port.

The Gigabit PoE Switch supplies PoE electrical power on industry standard 2-pair (RJ-45 pins 4/5 positive and 7/8 negative) along with Ethernet data in one single cable allowing you to expand your network where there are no power lines or outlets. This enable you to deploy Novanex PoE devices such within 250 meters, and can support gigabit PoE extension up to 2,000ft by using a gigabit PoE extender units. Contact sales@novanexsolutions.com for more information on range extension products.

Specs

• (4) 10/100/1000Mbps auto-negotiation RJ-45 ports with PoE auto-detect
• (2) uplink 10/100/1000Mbps auto-negotiation RJ-45 ports
• Complies with IEEE 802.3af/at standards
• Maximum bandwidth backplane 10 Gbps
• Supports PoE power up to 30W for each port
• 48V 2amp 60W power adapter included (contact sales@novanexsolutions.com for country-specific power adapter if needed)

• Height 1.06″ (27mm) Depth 2.83″ (72mm) Width 4.92″ (125mm)

• Operational Temperature: -40°F to 158°F (-40°to 70°C)
• Humidity: 5% to 90%, non-condensing

• Ruggedized wall mount black Aluminum casing
• Optimized for heat extraction and isolation without fans